Electronic Devices, Inc. - Digital Transducer Test Set Model TT-2Dx

TT-2Dx^©
Universal Extended Range Transducer Test Set

[ Home] [ Chirp Depth Sounder Test Set] [ Computer Controlled Depth Sounder Test Set]
[ Low Frequency Universal Transducer Test Set] [ Universal Transducer Test Set] [ Multi Sensor Transducer Test Set ]
[ Computer Controlled Transducer Test Set ] [ Loran-C Signal Generator ] [ Downloads]

Photograph of TT-2Dx NOW YOU CAN TEST:

Piezoelectric transducers.
Transformer coupled transducers.
Magnetostrictive transducers.

Check Transducers for proper operation: Determine if a transducer is good or bad within seconds.
Wide Frequency Range: 10 kHz to over 2,500 kHz.
Accurate, repeatable readings: Direct display of computed transducer impedance.
Accurate Frequency Readout.: Displays resonant frequency within 10 Hz.
Battery Included

How it Works
The TT-2Dx is designed to test acoustic transducers for resonance over the frequency range of 10 kHz to 2,500 kHz. The TT-2Dx tests most all types of transducers, including transformer-coupled and magnetostrictive devices. The transducers relative phase and the impedance at resonance are displayed on the two line LCD display. The leakage resistance of the transducer can be measured and displayed over the range of 40 ohms to 10 megohms.

Using the TT-2D
Connect a transducer to the xducer jack. Turn the power on and rotate the frequency controls until the LED brightness peaks, indicating a resonant point. Read the frequency and impedance. Press a button to check for continuity/leakage. If the resonant frequency is correct and no leakage is indicated the transducer and associated wiring are good. Bad transducer elements and incorrect cabling or wiring are easily diagnosed.

Test cable and 9 volt battery included!

FREQUENCY RANGE:	10 Khz to 2500 Khz, typically 7 to 2700 KHz.
FREQUENCY ACCURACY:	0.05% of indicated frequency +/- 1digit.
FREQUENCY RESOLUTION:	10 Hz.
IMPEDANCE RANGE:	5 - 1000 ohm, usable 1 - 9990 ohms.
IMPEDANCE ACCURACY:	10% of indicated reading.
TRANSDUCER TYPES:	All types, including transformer coupled.
BATTERY TYPE:	Standard 9V transistor radio type.
CURRENT DRAIN:	25 mA avg, 40 mA max.
EST BATTERY LIFE:	10 hours continuous use with alkaline battery
RECOMMENDED BATTERY:	Alkaline type similar to EVER READY #522 or equivalent.
WEIGHT:	11 ounces with battery and test cable.
SHIPPING WEIGHT:	2 pounds.

Please E-Mail edisales@bbginc.com or telephone (757) 366-9211 (within the USA) for more information on EDI's product design services.

Click here to email your questions or comments to EDI.

[ Home ] [ Chirp Depth Sounder Test Set ] [ Options for Depth Sounder Test Set ]
[ Computer Controlled Depth Sounder Test Set ] [ Universal Transducer Test Set ]
[ Downloads ]

Electronic Devices, Inc.

1708 South Park Court, Chesapeake, VA 23320. Phone (757) 366-9211

Cat TT-2 01/98